Bose Mini Soundlink II – empty battery fix

By | November 3, 2017

EDIT 2: Another thing to try is to let the battery run out completely. Then it seems it’ll recharge properly.  You can drain the battery a lot faster by turning the volume up.  It’ll show the red charging light for a while until it turns itself off, then put it on the charger. 

EDIT: BOSE has removed the previous version of the software from their page.

To reset it, which seems to work in some cases;

  • Plug the speaker into power.
  • Hold the mute/multi-function button down for 10 seconds (lights will flash).
  • Unplug the power cord, then let go of the button.
  • Give it a second, then plug it back in to power.
  • If that fixed it, good.
    • If not, go to the updater site and apply the same version of the update as you already have.

The Bose Soundlink Mini II, one of the best bang-for-the-buck purchases I’ve ever made (along with the Dyson V8 Absolute) finally started to show its age.

I got the dreaded charging warning!
The battery should last far longer than a year, so my issue was likely with the firmware. It was the latest version, so I had to experiment.

What ultimately seemed to fix the charging issue was to downgrade the firmware, reset and reboot the Mini, then upgrade the firmware again!

Here’s how;

1, Connect to http://btu.bose.com
You might have to download the little updater software which will then prompt you to connect the speaker.

2, Once your speaker is connected and it shows you what firmware you have installed, and eventual updates, press the following keys in sequence on the keyboard
[a] , [d] , [v] , [up arrow] , [down arrow].

This will unlock the “advanced menu” which allows you to downgrade your firmware.

Downgrade firmware

At this point, try to charge the speaker fully overnight and see if that worked.

This worked for me. Once the speaker was charged, I updated to the latest firmware again and it’s been good ever since.
If it does NOT work, then update the firmware to the latest version and try again and that should do the trick.

27 thoughts on “Bose Mini Soundlink II – empty battery fix

  1. soe

    now I downgraded and tried to re set and re boot but I did not see ant light on it , also now I,m charging the mini , still do not see any light on it. Is it normal or not?

    Reply
  2. Al

    Hello i’d like to request for an assistance on fixing my SLM 2. I had executed the above mentioned steps but i got stuck during pressing a,d,v, arrow up and down. After pressing, it seems like there is no drop down menu for me to select the firmware version. It just shows off the advance menu and system info.

    Got my bose approximately 4 months wen it enters in this state.

    Thank you.

    Reply
    1. reverend

      What software version does it show? It should give you an option to update yours if it’s not already updated. It’s been a while since I did this so I don’t remember – did you have to click on the “Advanced” button for it to give you the update/downgrade options?

      Reply
  3. Jayakrishnan KR

    I did this and got the issue resolved for a week. But now I have to do this every now and then to keep the speaker working. Is there any permanent fix for this?

    Reply
    1. reverend

      Mine hasn’t done it since. Do you keep your speaker fully charged or run it really low all the time? What if you try to charge it every night or so and see if it stays alive longer?

      Reply
  4. Mike

    Totally works…woke up this morning and speaker was dead. Reverted back to older firmware took five mins once connected. At this stage it seemed to reboot and started charging with usual beeps. I then waited til 20% and reverted back to latest. Once complete I switched to charging via usb cable plug via docking station. Works a treat.

    Reply
  5. jy

    Fixed! thanks for this post! Yes the old firmware wasn’t there but I just hit install on the current firmware and after a few minutes the speaker rebooted and is now charging. 🙏

    Reply
  6. Richee

    there’s no downgrade option in the advance option sir. I can see only the 1.4 version. when I click the down arrow for that menu it doesn’t show the 1.3 version. why? please help me.

    Reply
    1. reverend

      See the first link in the post. It seems Bose was afraid off issues that would arise from people downgrading the software so they removed the downgrade option.
      You should be able to reapply the most recent update, or do the reset procedure, or just let the battery drain until it shuts off and then recharge it.

      Reply
  7. Julian Maurice

    Hi, I must be having a dumb moment, but can someone please explain what the A,D,V keys are? Are you referring to keys on my PC keyboard, or are the keys on the Bose unit?

    I have been trying to open the advanced features menu on the updater, but I’m stuck at this point.

    Thanks for any help.

    Reply
    1. reverend

      Hi there. Yes, it’s the keys on your keyboard on the computer. Bose did remove the downgrade firmware option (see the first link in the post) so you can either try a reset or let the battery drain to where it shuts itself off and then stick it on the charger.

      Reply
  8. Roberto

    Hello, is the version 1.1.3 still available? I can’t see it and can’t fix the red light issue blinking on my bose.

    Reply
    1. reverend

      Hi Roberto. No, Bose removed that (see the first link in the post) due to their fear or issues arising from people downgrading.
      You can try either the reset process or let the battery die completely and then charge it. That seems to work for me.

      Reply
  9. camila

    Hi,
    is there a way to solve the red blinking light.

    please help

    Reply
    1. reverend

      That typically means your battery is critically low. Plug the speaker into the charger and let it sit overnight and it should be good. If it still blinks after an hour or so, unplug the charger for a minute, then plug it back in.

      Reply
  10. Johndraz

    Followed your advice and drained the battery, now stuck with a situation where the light is a steady red, but unable to reinstall latest system software because not enough power to run the install. Battery refuses to recharge . Reboot gives a yellow light after about 10 seconds but then simply reverts to the steady red. This situation is driving me insane! Any further advice?

    Reply
    1. reverend

      If you plug the charger in to the side of the speaker and let it sit overnight (and all day while you go to work), knock on wood, it will have charged. That has worked for me the last couple of times it’s done the “pretend I don’t want to charge” thing.

      Depending on how long you’ve had it, there’s the odd chance that the battery actually IS completely done for.

      Reply
      1. Nick

        Stuck in the same situation.
        Power’s completely drained, won’t turn on, connecting to AC gives a solid red light, connecting to PC says it doesn’t have enough power to update the firmware.
        Been charging for a day, and still solid red.

        How long in general does it take to come back? Or is it a brick now.

        Reply
        1. reverend

          Charging overnight seems to work in most cases. Try using the included cradle to charge, or plug a 2.1 amp tablet/phone charger into the MicroUSB port on the side to charge it and see what happens. Try disconnecting the charger for 30 seconds every few hours and plug it back in.

          Reply
  11. KARL SICHELSTIEL

    I am having the SAME problem stated above by Johndraz… Speaker will not turn on, battery is completely dead, red charging light remains on steady (NOT blinking) when plugged in with original Bose charger plugged into side port for several hours. WTF? Help please!!!

    Reply
  12. Thomas Boby Mathews

    My power light , Bluetooth light and aux light is blinking not coming on. Why it causing trouble , Bose is not durable died in 1 year 4 months .

    Reply
  13. DK

    Bose has been entirely unhelpful. I patiently provided the details of my troubleshooting, repeated all steps with Bose tech support on the phone, and was ultimately told Bose required a credit card in order to cover the $53 shipping for tech repair service. I view this as asking the consumer to pay for a fix to manufacturer/tech issues. Very poor stance from Bose. I purchased JBL Bluetooth speakers for my children, which deliver good quality sound and simply work as a consumer should expect, without issue for more than 3 years. I declined the Bose service and will vote with my wallet by purchasing quality products elsewhere.

    Reply
  14. Bose Guy

    Reflashing 1.1.4 on top of my 1.1.4 fixed me right up!!!

    What a strange issue to have and why bose hides their advanced features behind a hidden key combo is crazy. And why don’t they tell us? So that we have to go to Rob to tell us.

    Rob, you are way better than bose!
    Thank you so much!!!

    Reply
  15. ft

    Wonderfull!!! After nothing worked, installing the current firmware version again solved the ´red light problem´. Thank you so much!!!

    Reply

Leave a Reply to Nick Cancel reply

Your email address will not be published. Required fields are marked *